A system that provides durable, accurate and high-quality identification of building service pipes. These markers have pressure-sensitive acrylic adhesive backing for easy application and clear, legible text available in English or French.
SMS recommends that all Pipe Markers be installed with the support of banding tape.
MATERIAL
6 mm Thick | Pressure Sensitive Acrylic Adhesive Backing | Silk-screened with Vinyl Ink
SIZE OPTIONS
1" Nominal – Card Size: 1.125" x 8" | Letter Size: .75"
2" Nominal – Card Size: 2.25" x 14" | Letter Size: 1.75"
COLOUR
Coding conforms to C.G.S.B. – 24.3-92 & ANSI A131-1981
LETTERING
The words "VACUUM", "VENT" & "WATER" will repeat twice on the 2" Nominal Card Size.
GREEN ADHESIVE PIPE MARKERS | T – W LABELS
IDENTIFICATION SYSTEM SPECIFICATION
PIPE SYSTEMS:
Contractor shall identify all pipe or pipe covering with S.M.S. Coil-Mark or adhesive style building service pipe markers. All identification shall incorporate direction of flow arrows, and the manufacturer’s standard system designations, or abbreviations. Special system designations and abbreviations are required to be submitted for approval prior to use. Colour coding must be in conformance with CAN/CGSB–24.3–92 and ANSI A131-1981. Identification must be applied at intervals not greater than 40 ft., adjacent to valves, behind access doors, at changes in direction and where pipes pass through walls or floors. All pipe identification shall be installed in accordance with the manufacturer’s recommendations.
NOTE: Diagrams are not to scale.
Special custom text and/or colours are available upon request.
